 |
 |
 |
 |
 |
 |
 |
 |
|
|
|
|
|||||||||||||||||||
| |||||||||
Description Accessories Files
Vertex Standard - VX-4000 LVHF/VHF/UHF 250 Channel Mobile Radios
Built to last, built to perform under demanding environments, the VX-4000 is the radio of choice. Backlit programmable softkeys combined with a wealth of programming customizations and a large easy to read LCD display makes the VX-4000 easy to operate. Isn't that important, when you have other duties to attend to?
Motorcycle Control Heads Available ! New remote kit specifically designed for motorcycle installations. It can be used with the VX-4000, VX-5500 or the VX-6000 mobiles.Base Station Console configurations !
We designed the smaller size, but left in all the functionality. There are 5 top mounted function keys. Each of the function keys can be programmed to any of the available 25 functions you have become familiar with on the VX-4000/5500/6000 mobiles.
The volume and channel controls have a heavy detent for secure operation. The knobs are oversized and ridged. There is also a front
mounted Emergency button in the center to prevent accidental activation. There is even an embedded mic element in the front panel for Emergency activation listening (Dispatcher can here what’s going on).Did you know the VX-4000 could be configured for use as a Base Station? The BSC-5000 Base Station Console is a complete housing that will accommodate the VX-4000, VX-5500 or VX-6000 mobiles at any power level and any band.
Model Alignment/Service Related CT-88 The CT-88 cable is used in conjunction with the FIF-8 box to make adjustments to the alignment. This is for the VX-4000/VX-5500/VX-6000 mobiles. The CT-88 connects from the DB25 accessory port of the mobile, to the FIF-8 box interfaced to your PC.
FIF-8 Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).
Base Stations BSC-5000 Variable Base Communication Configurations for Greater Value
Use the console, combined with VX-5500 or VX-6000 mobile radios, to get a choice of bands and power ranges for just the right base station solution and maximum return on investment.
Control Head CNT-4000 Control Head (extra control head needed in Dual Head configuration. Also, requires T9206958A for dual head remotes.) CNT-5000 Compact motorcycle control head for the VX-4000, VX-5500 and VX-6000 mobiles.
Cover plate RMK-4000B Cover plate for the RF Deck in Remote Applications 
RMK-4000H Cover plate for the Control Head (Includes mounting bracket and hardware) 
RMK-5000B Dedicated Motorcycle Control Head. Built for ease of use and all weather operation.
DC cables CT-96PS Ignition Sense Cable Ignition Sense Cable for the VX-4000, VX-5500 and VX-6000 mobiles. E-DC-22 30 ft DC cable for VX-4000/-5500 mobiles.
DC Noise Filters LF-1 Plug-In Line Filter 
Microphone MD-11A8J/4000 Desk Microphone MH-53A7A The MH-53A7A is a Noise-Canceling Microphone .
MH-53A8A Heavy Duty Weatherproof Noise Canceling DTMF Microphone for the CNT-5000 remote Control Head.
MH-53B7A The MH-53B7A is a Noise-Canceling Microphone with DTMF keypad.
MH-53C7A The MH-53C7A is a Heavy Duty Microphone .
Mounting Bracket MMB-75 Mobile Mounting Bracket ( Supplied w/radio) 
MMB-76 Locking Mobile Mounting Bracket 
MMB-88 This is a mounting bracket, which is a base plate for the CNT-5000 and MLS-200.
The MMB-88 mounts to a motorcycle. The CNT-5000 and MLS-200 then mount to the MMB-88, side by side.
Programming and Installation CT-105 FIF-10 interface cable to connect:
VX-530/600/800/900 Portables also VX-5500/VX-6000 Mobiles.
CT-70 Radio Programming Cable (Requires VX VPL-1 Cable) CT-72 Cloning Cable (Set-to-Set Clone) 
EC005N900 VX-4000 VHF Service Manual EC005N901 VX-4000 VHF Service Manual EC005U900 VX-4000 UHF Service Manual FIF-10A FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included. FRB-4D Alignment Interface Box (Required for All alignment) * INST-OPT Installation Charge. PROG/ADD Factory Radio Programming (Each additional channel after 1st) PROGRAMMING Factory Radio Programming (single channel only) VX MPI Programming Kit for the MDC1200 and the FVP-35 Remote Cable CT-81 Remote Cable for RMK-4000 series (20 ft) (RF Deck to Control Head) 
CT-82 Remote Cable for RMK-4000 series (8 ft) (RF Deck to Control Head) 
CT-83 Remote Cable for RMK-4000 series (2 ft) (RF Deck to RF Deck) 
CT-93 Remote Cable for RMK-4000 series (30 ft) (RF Deck to Control Head) 
Signaling CN-6 Connector Board (to be used with the installation of third-party options.) 
F2D-8 Two-Tone Decoder. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) 
F5D-14 Five-Tone Enc/Dec Unit. (requires FIF-7 if used on the VX-4000 / VX-5500 / VX-6000) 
FIF-7A Interface Board (for VX-4000 / 5500 / 6000 with FVP-25, FVP-35, F2D-8 & VTP-50 option boards)
Replaces the FIF-7
FVP-25 Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000) 
FVP-35 Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200 MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming. 
Speaker MLS-100 External Speaker (12 Watt Peak) 
MLS-200 15 W peak external weatherproof speaker.
Land Mobile Radio \ Sales Support \ Brochures \ Mobiles
VX-4000.pdf ( 825.13 KB )
Land Mobile Radio \ Technical / Service Support \ Manuals \ Owners Manuals
VX-4000.pdf ( 348.83 KB )
|
COPYRIGHT©2003-2024 Yaesu USA.
|
