Using the Sub-Receiver option, get dual-band receive for greater flexibility and interoperability for full situational awareness. Single VHF or UHF transmit with dual-band receive helps to make communications more productive.
When Safety Counts
As with all Vertex Standard mobile radios, the VX-4100 has built-in Emergency alert for enhanced driver safety. A panic button can be triggered by the front panel button to alert the dispatcher when problems arise.
In addition, the VX-4100 features an internal emergency microphone on the front panel so the driver can continue to communicate with dispatch when unable to use a speaker microphone attachment.
Horn alert capability enables base station operator to issue a 2-Tone, 5-Tone or DTMF signal remotely to activate the car’s horn to go off as an additional emergency alert to draw attention to the vehicle.
Exclusive Auto-Range Transpond System (ARTS™)
Designed to inform the user when out of communication range with another ARTS™-equipped station. If out of range more than 2 minutes, the radio senses no signal and beeps to alert the user. The base station can then alert the field unit to move back into range. A great solution to keep your workers coordinated.
FIF-8 cable to the Mobiles VX-3200/VX-4200/VX-4200/VX-2500. Used for updating firmware using the FIF-8 firmware writer.
FIF-8
Firmware Writer. Unit comes with a cable for the muli-pin radios (VX-900, VX-4000, etc.). Please order the CT-92 cable for firmware updating of modular connector radios (VX-3200, VX-4200, VXR-9000, etc.). Powered by a PA-23B (not supplied).
DC cables
E-DC-22
30 ft DC cable for VX-4000/-5500 mobiles.
DC Noise Filters
LF-1
Plug-In Line Filter
Microphone
MD-12A8J
MD-12A8J Desktop Microphone
MH-64A8J Microphone
DTMF Microphone
MH-67A8J
Standard Microphone
MH-75A8J
DTMF Microphone, 16 Key, Black
Mounting Bracket
MMB-85
Quick Release Mobile Bracket for VX-4100/4200
Programming and Installation
CT-104A
Interface Cable for FIF-10A
FIF-10A
FIF-10A USB Interface for PC programming. Check specific models for additional cable pigtails. Pigtails not included.
INST-OPT
Installation Charge.
PROG/ADD
Factory Radio Programming (Each additional channel after 1st)
PROGRAMMING
Factory Radio Programming (single channel only)
T9101411
Cloning Cable
VX VPL-1
Programming cable from PC. Check specific models for additional cable pigtails.
Signaling
DVS-5
Digital Voice Storage Board (120 sec. max.)
FVP-25
Encryption Unit (Band Inversion Type) and DTMF Paging. (requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000)
FVP-35
Plug-in Rolling Code Encryption. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming
MDC1200
MDC1200 ANI Encoder. Requires FIF-7 if installed into the VX-4000 / VX-5500 / VX-6000. Requires VX MPI for programming.
SRX-1
Interoperability Receiver Board. This is a UHF Sub-Receiver designed to be installed into the VHF VX-4100 or VX-4200 mobiles (VX-4104, VX-4204).
SRX-2
Interoperability Receiver Board. This is a VHF Sub-Receiver designed to be installed into the UHF VX-4100 or VX-4200 mobiles (VX-4107, VX-4207).
